When your Palm Beach Gardens air conditioner stops working you’ll want to have it fixed fast. There are many reasons your air conditioner may fail, and it is helpful to be aware of some of them.
It may sound obvious, but check the setting of your air conditioner. It’s always possible that you accidentally set the temperature too high so your air conditioner does not kick in. Make sure that thermostat is set “cool” and that everything is plugged in. Ensuring that these simplest of problems are not the culprit is the best place to start.
Dirty Filters or Ice Build-Up
Low output of cold air could be due to dirty air filters, ice build-up on coils, or air duct problems. Dirty air filters that need to be replaced can weaken airflow. Ice build-up on the coils can cause major blockages which reduce the amount of cold air output. If air ducts have become disconnected or have leaks it can cause air to go into unused spaces.
Improper Refrigerant Charge
An AC that does not cool the air properly can be caused by a few things: there could be low refrigerant charge, a refrigerant leak, or a worn out or broken compressor. With low refrigerant levels or a low refrigerant charge comes a decrease in how much cold air the AC can create. This can be caused by a slow refrigerant leak or an AC that has not been properly maintained. If the compressor has worn out or is broken it will also affect how well the air conditioner cools the air, causing the air to still blow but at an undesirable temperature.
Air conditioners that leak water could have a condensate pump or condensate drain problem. It could also mean that the pool drip pan is full, causing the automatic sensor to turn off the air conditioner to prevent overflow.
We hope that this information is helpful. It’s always good to keep informed, but remember that any maintenance or repairs on your air conditioner should be performed only by professionals. Call Envirotech for all your Palm Beach Gardens air conditioning needs.